Provide custom product specifica-tions, icons, logo, packaging.
Mode of payment
Use SSL encryption to protect any of your information security.
1-3 days delivery, OEM customization takes 4-6 days. Final time decision based on the actual project, please contact us to confirm.
|Manufacturer||Cozlink||Place of Origin||Shenzhen, China||Model||CZT-QSFP28-SR4|
|Data Rate||100G||Fiber Mode||Multi Mode Fiber (MMF)||Types of Interface||MPO/MTP|
|Types of Laser||VCSEL||Operating Temperature||Standard 0~70°C||Operating Humidity||0%~90% RH (no condensing)|
|Transmission distance||100m||Modes of Communications||Duplex||Wavelength||850nm|
|Receiver Sensitivity||<-5.2dBm||Extinction Ratio||>2.0dB||Form Factor||100GBASE QSFP28 SR4 Transceiver|
|Warranty||1-3 Years||Power Consumption||<3.5W||Weight||0.3kg|
|Power Supply||+3.3V||Condition||New||Hot Pluggable Times||200|
|Average Output Power||-7~2.3dbm||Compatible Brand||Juniper|
Juniper JNP-QSFP-100G-SR4 is 850nm wavelength, Duplex Juniper optical transceiver,through MPO/MTP connector,transmitting distance can reach up to 100m .
Cozlink provide CZT-QSFP28-SR4 (in stock) compatible optical transceiver using VCSELlaser,Sold in eBay and amazon,we have fully stocked,high production efficiency and fast delivery time.All of Cozlink products are 100% tested , and can be completely applied in Ethernet、Fibre Channel network devices, such as switches and routers.
If you want to get latest product datasheet or don’t know how to buy it, please feel free to contact our service online.
(Note:Class 1 laser output power is less than 0.4mW,it won’t be harmful to eyes,we can ensure the safe in design.)(with DDM function can help system management to predict the life of optical transceivers, isolate system faults and verify the modules compatibility in the site installation.
100GBASE SPT-QSFP28-SR4 is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings. The QSFP28 full-duplex optical module offers 4
independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 multi-mode fiber. An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector. The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Rack to Rack
Infiniband QDR, DDR and SDR
Compliance with the international ISO9001, CE, FCC, RoHS standards.Cozlink strict implementation of standardized management and control of the design, development, production, installation and service.
When you have any questions about Cozlink, please contact us. We will reply to you as soon as possible.
Recommended for you 1/2