Provide custom product specifica-tions, icons, logo, packaging.
Mode of payment
Use SSL encryption to protect any of your information security.
1-3 days delivery, OEM customization takes 4-6 days. Final time decision based on the actual project, please contact us to confirm.
|Manufacturer||Cozlink||Place of Origin||Shenzhen, China||Model||CZT-PH3102-02D|
|Data Rate||125M||Fiber Mode||Multi Mode Fiber (MMF)||Types of Interface||LC|
|Types of Laser||FP||Operating Temperature||Standard 0~70°C||Operating Humidity||0%~90% RH (no condensing)|
|Transmission distance||2km||Modes of Communications||Duplex||Wavelength||1310nm|
|Receiver Sensitivity||<-31dBm||Extinction Ratio||10~17dB||Saturated Optical Power||-3dBm|
|Form Factor||SFP||Warranty||1-3 Years||Power Consumption||<3W|
|Hot Pluggable Times||200||Average Output Power||-20~-14dbm||Compatible Brand||Alcatel-Lucent|
Alcatel-Lucent SFP-100-LC-MM is 1310nm wavelength, Duplex Alcatel-Lucent optical transceiver,through LC connector,transmitting distance can reach up to 2km .
Cozlink provide CZT-PH3102-02D (in stock) compatible optical transceiver using FPlaser,Sold in eBay and amazon,we have fully stocked,high production efficiency and fast delivery time.All of Cozlink products are 100% tested , and can be completely applied in Ethernet、Fibre Channel network devices, such as switches and routers.
If you want to get latest product datasheet or don’t know how to buy it, please feel free to contact our service online.
(Note:Class 1 laser output power is less than 0.4mW,it won’t be harmful to eyes,we can ensure the safe in design.)(with DDM function can help system management to predict the life of optical transceivers, isolate system faults and verify the modules compatibility in the site installation.
The SFP transceiver is high performance, cost effective modules. It is designed for100BASE-FX Applications of 2km with MMF. The transceiver consists of two sections: The standard SFP part and thePHY part built with SGMII interface. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS(or Link)/Disable/Fault information via I2C register access. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol.
Build-in PHY supporting SGMII Interface
1310nm FP laser and PIN photo-detector
2km transmission with MMF
Standard serial ID information Compatible with SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
Very low EMI and excellent ESD protection
Switch to Switch interface
Switched backplane applications
Gigabit Ethernet To Fast Ethernet
Other optical transmission systems
Compliance with the international ISO9001, CE, FCC, RoHS standards.Cozlink strict implementation of standardized management and control of the design, development, production, installation and service.
When you have any questions about Cozlink, please contact us. We will reply to you as soon as possible.
Recommended for you 1/2