3m (10ft) Juniper Networks QFX-SFP-DAC-3M Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable

Storage Temperature	-40~+85℃	Operating Temperature	0~+70℃	Power Supply Voltage	3.14~3.47V
Power Dissipation	0.5W	Wire AWG	30AWG	Connector Type	SFP+ to SFP+
Data Rate	10Gbps	Cable Type	Passive Copper Cable	Cable Length	3m(9.84ft)

The 10G Direct Attach Cables are based on the SFP+ transceiver format and are available in both twinax copper. The SFP+ interface accepts along with hot-pluggable, small-footprint, optical transceivers, a Direct Attach Cable “10GSFP+Cu”, which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly. The 10GSFP+Cu option is defined for 10GbE applications over passive copper. 10GSFP+Cu (SFP+ Direct Attach) is a copper interconnect using a passive twin-ax cable assembly that connects directly into an SFP+ housing. It is low power, low cost and low latency with the added advantage of having the small form factor of SFP+, and smaller, more flexible cabling. Cozlink.com supplies a variety of 10G SFP+ to SFP+ Direct Attach Cables(DAC), length from 0.5m to 10m. And our 10G SFP+ to SFP+ Direct Attach Cables are able to compatible with network switches of Cisco, Juniper, HP and so on. For example, in this page, our 3m (10ft) Juniper Networks QFX-SFP-DAC-3M Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable is 100% tested in Juniper mainstream switches, that mean they work perfectly in Juniper mainstream switches. For more info, please contact us by email or "Contact Form" in "Contact US" page.

• Support for multi-gigabit data rates up to 10.5Gbps   
• Data rates backward compatible to 1Gbps  
• Support for 1x, 2x, 4x and 8x Fiber Channel data rates   
• Hot-pluggable SFP 20PIN footprint  
• I/O Connector designed for high speed differential Signal applications   
• Improved Pluggable Form Factor(IPF) compliant for enhanced   
• EMI/EMC performance   
• Low Power Consumption < 0.5W   
• Power Supply: +3.3V  
• Compatible to SFP+ MSA   
• Temperature Range: 0~ 70 °C   
• ROHS Compatible 

High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers Switched fabric I/O such as ultra high bandwidth switches and routers

Data center cabling infrastructure

High density connections between networking equipment

Part Number	Product Description
CZT-SFP+C05	SFP+ Direct Attach (10GSFP+Cu), 0.5m   0ºC ~ +70ºC
CZT-SFP+C1	SFP+ Direct Attach (10GSFP+Cu), 1m   0ºC ~ +70ºC
CZT-SFP+C3	SFP+ Direct Attach (10GSFP+Cu), 3m   0ºC ~ +70ºC
CZT-SFP+C5	SFP+ Direct Attach (10GSFP+Cu), 5m   0ºC ~ +70ºC
CZT-SFP+C7	SFP+ Direct Attach (10GSFP+Cu), 7m   0ºC ~ +70ºC
CZT-SFP+C10	SFP+ Direct Attach (10GSFP+Cu), 10m   0ºC ~ +70ºC

Compliance with the international ISO9001, CE, FCC, RoHS standards.Cozlink strict implementation of standardized management and control of the design, development, production, installation and service.