WS-C3560V2-24PS-S belongs to the Cisco Catalyst 3560 v2 Series Switches, this switch consumes less power than other layer 3 switches and is the best choice for access layer switching for enterprise and branch-office environments. Cisco Catalyst 3560 V2 Series switch WS-C3560V2-24PS-S is the next-generation energy-efficient Layer 3 fast Ethernet switches. This 3560V2 switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560V2 Series switch consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.
|Device Type ||Switch - 24 ports - L3 - Managed |
|Enclosure Type ||Rack-mountable 1U |
|Ports||24 x 10/100 (PoE) + 2 x SFP|
|Power Over Ethernet (PoE)||PoE|
|MAC Address Table Size||12K entries |
|Routing Protocol||RIP-1, RIP-2, static IP routing|
|Remote Management Protocol||SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c|
Layer 3 switching, auto-sensing per device, DHCP support, auto-negotiation, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping,
Intrusion Detection System (IDS), MAC address filtering, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Dynamic Trunking Protocol
(DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service
(QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
|Compliant Standards||IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|Power||AC 120/230 V ( 50/60 Hz ) |
|Dimensions (WxDxH)||44.3 cm x 29.5 cm x 4.4 cm|
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
|MFG Part number ||Description||Price|
|GLC-GE-100FX ||Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet Sfp Ports||US$6.98|
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.
1. Finding the corresponding optical module compatibility matrix via Cisco official website.
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.
The Cisco WS-C3560V2-24PS-S Switch is designed for enterprise access layer switching. It can be upgraded by purchasing IP services license to activate advanced layer 3 routing capability to fully support OSFP, BGP, EIGRP, RIP routing. It reduces total cost of ownership through simplified installation and operation. This high quality Cisco switch works with a number of Gigabit Ethernet SFP optical transceivers. You can easily find these high quality fiber optic transceivers at very competitive rates on Cozlink. What makes this even better that Cozlink also offer you a wide range of patch cords, fiber optic pigtails and high speed cables to choose from and Cozlink also ensure that you get the same day shipping.