Customer Service: +0086-755-21613334

Optical Transceivers for Cisco WS-C3560V2-24TS-S Switch

Cisco WS-C3560V2-24TS-S Switch Overview

WS-C3560V2-24TS-S belongs to the Cisco Catalyst 3560 v2 Series Switches, this switch consumes less power than other layer 3 switches and is the best choice for access layer switching for enterprise and branch-office environments. Cisco Catalyst 3560 V2 Series switch WS-C3560V2-24TS-S is the next-generation energy-efficient Layer 3 fast Ethernet switches. This 3560V2 switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560V2 Series switch consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.

Cisco WS-C3560V2-24TS-S Switch

Cisco WS-C3560V2-24TS-S Switch Parameters

Device Type 
Switch - 24 ports - L3 - Managed           
Enclosure Type
Rack-mountable 1U
Fast Ethernet 
24 x 10/100 + 2 x SFP
Switching capacity: 32 Gbps
Switched virtual interfaces (SVIs): up to 1000 ¦ Virtual interfaces (VLANs): 1000 
MAC Address Table Size
12K entries 
Jumbo Frame Support
9016 bytes
Routing Protocol 
RIP-1, RIP-2, HSRP, static IP routing 
Remote Management Protocol

Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X),

IGMP snooping, Syslog support, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm

Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP

snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access

Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR),

Per-VLAN Spanning Tree Plus (PVST+)     

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
AC 120/230 V ( 50/60 Hz ) 
Dimensions (WxDxH)
44.3 cm x 29.5 cm x 4.4 cm
3.7 kg

Optical Transceivers for Cisco WS-C3560V2-24TS-S Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number
Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet Sfp Ports

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 

2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6

3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.


The Cisco WS-C3560V2-24TS-S Switch is designed for enterprise access layer switching. It can be upgraded by purchasing IP services license to activate advanced layer 3 routing capability to fully support OSFP, BGP, EIGRP routing. It reduces total cost of ownership through simplified installation and operation. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.

Leave a Comment
Name : *
E-mail : *
Copyright © 2018 All Rights Reserved.