With the requirements of communication services increasing, the value-added services (VAS) including 3D network games, video conference/phone, Video on Demand (VoD) and IPTV are key means for operators to provide differential services to attract more subscribers, and gain income growth. ZTE ZXA10 C320, a small size, full-service optical access convergent platform, provides carrier class QoS and reliable network to meet the requirements for small-scale implementation of FTTx services.

  • 01 Original ProductZTE Original OLT, Reliable Quality
  • 02 Discount PriceUnique Supply Channels, Affordable Price
  • 03 Free SoftwareFree to provide a full set of software, deploy quickly
  • 04 Technical SupportFree technical support, remote guidance
Tap Click image to expand
Small Size and Compact Design, Flexible Network and Fast Deployment

For GPON/EPON, supports 8 PON ports per card and 1024 ONU/ONTs per rack with 1:64 split ratio and long reach up to 20km coverage, meets all the operators’ requirements for mass optical access roll-out scenarios.

Enhanced L3 routing/VPN, meets L3 networking requirements.

PON Unified Platform, Reducing TCO and Saving Initial Investments

The ZXA10 C320 adopts ZXA10 C300 hardware and software architecture, compatible with all C300 line cards, including xPON, P2P cards, greatly saving the equipment cost.

ZXA10 C320, as a unified platform, supports GPON/EPON/P2P.

Low-cost Way for Full Service Provisioning and Network Convergence

Time and clock synchronization function, supports synchronous Ethernet and TDM clock source to meet the networking and service requirements for mobile backhaul.

Supports IGMP Router/Snooping/Proxy protocols, SCB and two-level multicast duplication functions, provide reliable multicast control mechanism and abundant IPTV profiles.

IPv4 and IPv6 dual stack function, supports IPv6 service processing and forwarding, IPv6 QoS and multicast service bearing. Meets the operator’s requirements for smooth network and service evolvement to IPv6.

Full Redundancy Support to Ensure Carrier-class Reliability

Key parts of the system, including the main control card, the power input, work in active/standby mode or in redundant mode, support share loading, provides high guarantee for the system.

Uplink protections include STP/RSTP/MSTP link protection, LACP/trunking balanced and redundancy, support UAPS dual homing, BFD function and L3 routing protection.

A Green Product Contributing to Building a Green Communication World

Adopts green and environmental friendly materials, with a Smart and low power consumption design, ZXA10 C320 is the leading product in the energy saving and supports ports and boards dormant mode, the platform complies power consumption requirements with Europe CoC, RoHS energy saving and environment protection standards.

Shelf Dimensions

2U, 86.1 mm(H) * 482.6 mm(W) * 270 mm(D)

Power Supply

-48V/-60V DC, 110/220V AC with battery redundancy

Cabinet

Outdoor / Building: OUT50ET and EC90EB Outdoor Integrated Cabinets Dedicated room: indoor 19-inch standard cabinet

Slot Number

2*main control card slots+2*line card slots

User Side Interface

GPON/XG-PON1/P2P

Uplink Interface

10GE/GE/FE

The ZXA10 C300 allows operators to offer end users high bandwidth, multiple services, QoS and security efficiently and achieve more network TCO reduction. It balances massive optical access roll-out and economy. It provides the stable technology and service platform for full-service access and management such as HSI, VoIP, TDM, IPTV, and mobile backhaul. QoS and reliable network to meet the requirements for small-scale implementation of FTTx services.

  • 01 Original ProductZTE Original OLT, Reliable Quality
  • 02 Discount PriceUnique Supply Channels, Affordable Price
  • 03 Free SoftwareFree to provide a full set of software, deploy quickly
  • 04 Technical SupportFree technical support, remote guidance
Tap Click image to expand
Unified Platform, Powerful Full-service and Smooth Evolution Ability

Multi-service Converged: Unified bearing Voice, HSI, IPTV, traditional TDM service and mobile backhauling..

Large-capacity and High-density: Supports 16 ports per GPON card, 8-port XG-PON1 card, 48-port P2P card, provides up to 128/256 PON ports in a 9U shelf.

Multi-PON Coexisting: Supports GPON, XG-PON1 and P2P in the same chassis, and enables smooth migration to TWDM-PON.

Excellent Performance, Industrial First Star Product

Perfect H-QoS function: Provides the function that based on the service provider, user and service requirements for service control.

Highly Precise Time/Clock Synchronization Feature: Supports IEEE 1588v2, SyncE and 1PPS+ToD, making it extremely suitable for mobile backhaul application.

Carrier-Class Reliability, Higher Service and System Assurance

Core Parts Redundancy: Cards and interfaces are working in active/standby mode or in redundant mode, all cards are hot swappable.

Multiple Uplink Protection: Supports STP/RSTP/MSTP/UAPS/ERPS (G.8032)/LACP for uplink port and board redundancy and protection.

1+1 Fan Protection: Supports enhanced two rows of fans to provide 1+1 heat dissipation protection.

Efficient Management, End-to-end Comprehensive Service Guarantee

Auto Operation and Maintenance System: Provides the industrial first Automatic FTTx network diagnosing and trouble-shooting system.

Unified Management Platform: Provides the ZTE NetNumen U31, an integrated Network Management System (NMS), for operators’ network and equipment management.

Expert Support Platform: Accessorized the ZXESS EasyserviceTM system to provide end-to-end service estimation, confirmation, detecting, analysis, alarm, diagnosis and optimization.

Green and Energy Saving, Multiple International Certifications

30% Lowest Power Consumption: Utilizes multiple port and board energy saving technologies to deliver an average of 30% power savings per port compared with EU’s CoC standard.

Series of Certifications: With the MIIT, CE, CB, NEBS, UL, FCC, MEF9, MEF 14 and RoHS international certifications to provide the different operator qualifications.

Shelf Dimensions

10U(9U card + 1U fan)

IEC19 shelf: 443.7 mm x 482.6 mm x 270 mm (Height x Width x Depth)

ETSI 21 shelf: 449.2 mm x 535 mm x 270 mm (Height x Width x Depth)

Shelf Configuration

19-inch: 2 main control switching cards + 14 line cards + 2*4.5U uplink cards + 2 power cards + 1 clock/environment detecting general public interface card(optional)

21-inch: 2 more line cards compared with the 19-inch frame

Line Card Interface

GPON//P2P/XG-PON1 line card, E1/T1 /STM-1 /STM-4

Uplink Interface

10GE/GE/FE/E1/T1 /STM-1 /STM-4

Power Supply

-48 V (DC) or -60 V (DC)

The SmartAX MA5680T series are developed based on Huawei's third generation unified platform and are the first aggregation OLTs in the world. The MA5680T series integrate the aggregation and switching functions, provide the high-densityxPON, Ethernet P2P, and GE/10GE ports, and provide the TDM and Ethernet private line services with high clock precision to support smooth Internet access service, video service, voice service, and high-reliabilityservice access. This series improve the network reliability, reduce the investment in network construction, and reduce the O&M costs. The MA5680T series include the large-capacity SmartAX MA5680T and the medium-capacity SmartAX MA5683T. The hardware and software of these two models are fullycompatible with each other to reduce the costs of goods preparation for the network. In these two models, the SmartAX MA5680T provides 16 service slots and the SmartAX MA5683T provides 6 service slots.

  • 01 Original ProductHuawei Original OLT, Reliable Quality
  • 02 Discount PriceUnique Supply Channels, Affordable Price
  • 03 Free SoftwareFree to provide a full set of software, deploy quickly
  • 04 Technical SupportFree technical support, remote guidance
Tap Click image to expand
Large-capacity shared platform

The MA5680T series provide the large-capacityshared platform that supports a high-speed switching capacity

Developed based on the iMAP hardware platform and the IAS software platform of Huawei, the MA5680T series adopt advanced architecture and design.

The switching capacity of the backplane is up to 3.2 Tbit/s.

The bidirectional switching capacity of the control board is up to 480 Gbit/s.

The GPBD board supports eight GPON ports and the entire subrack supports up to 8K ONTs.

The EPBD board supports eight EPON ports. Based on the 1:64 split ratio, the entire subrack supports up to 8K ONTs.

Sharing the development platform with Huawei's broadband access devices, the MA5680T series support the Layer 2 and Layer 3 features of the broadband access devices to provide user-oriented and future-oriented functions.

Powerful integrated GPON/EPON access capability

1. EPON access capability
The point to multi-point (P2MP) architecture is used to support the passive optical transmission over Ethernet. Symmetrical upstream and downstream rates of 1.25 Gbit/s are supported to provide the high-speed broadband services, meeting the bandwidth requirements of access users.
In the downstream direction, the bandwidth is shared by different users in the encrypted broadcast mode. In the upstream direction, time division multiplex(TDM) is used to share the bandwidth.
The MA5680T series support dynamic bandwidth allocation (DBA) with the granularity of 64 kbit/s. Therefore, the bandwidth of ONT terminal users can be dynamically allocated based on the user requirements.
The EPON system uses the passive optical transmission technology, and the optical splitter uses the P2MP mode and supports a split ratio of 1:64.
The supported transmission distance is up to 20 km.
The ranging technologycan be scheduled ranging, automatic ranging, or initial ranging.

2. GPON access capability
High rate is supported. The downstream rate is up to 2.488 Gbit/s and the upstream rate is up to 1.244 Gbit/s.
Long distance is supported. The maximum physical transmission distance of the ONT is 60 km. The physical distance between the farthest ONT and the nearest ONT can be up to 20 km.
High split ratio is supported. The 8-port GPON access board supports a split ratio of 1:128, which increases the capacity and saves the optical fiber resources.
High densityis supported. The MA5680T series provide the 8-port or 4-port GPON access board to increase the system capacity.
The H-QoS (hierarchical quality of service) function is supported to meet the SLA requirements of various commercial customers.

Powerful QoS capability

The MA5680T series provide the following powerful QoS solutions to facilitate the management of various services:

Supports prioritycontrol (based on the port, MAC address, IP address, TCP port ID, or UDP port ID), priority mapping and modification based on the ToS field and 802.1p, and DSCP differentiated services.

Supports bandwidth control (based on the port, MAC address, IP address, TCP port ID, or UDP port ID) with a control granularity of 64 kbit/s. Supports three queue scheduling modes: priority queue (PQ), weighted round robin (WRR), and PQ+WRR.

Supports HQoS, which assures the multi-service bandwidth for multiple users: The first level assures the user bandwidth, and the second level assures the bandwidth for each service of each user. This ensures that the assured bandwidth is allocated absolutely and the burst bandwidth is allocated fairly.

Comprehensive security assurance measures

The MA5680T series meet the securityrequirements of the telecommunication services, fully use the security protocols, and fully ensure the security of the system and the user.
1. System security measure
Protection against the DoS (denial of service) attack
MAC (media access control) address filtering
Anti-ICMP/IP packet attack
Source address routing filtering
Blacklist
2. User security measure
DHCP (Dynamic Host Configuration Protocol) Option 82 to enhance the DHCP security
Binding between MAC/IP addresses and ports
Anti-MAC spoofing and anti-IP spoofing
Authentication based on the serial number (SN) and password of the ONU/ONT
Triple churning encryption
Encrypted broadcast transmission in the GPON downstream direction for different users, such as AES (advanced encryption standard) 128-bit encryption
GPON type B OLT dual homing
Smart link and monitor link for the network with dual upstream channels

Flexible network topology

As a multi-service access platform, the MA5680T series support multiple access modes and multiple network topologies to meet users' network topologyrequirements on different environment and services.

Carrier-class reliability design

The system reliability of the MA5680T series is taken into consideration in the system, hardware, and software designs to ensure that the device runs in the normal state. The MA5680T series:
Provides the lightning-proof and anti-interference functions.
Supports fault pre-warning on the exhaustive (consumed) units and parts, such as the fan, power supply, and battery.
The 1+1 (type B) protection for the PON port and the 50 ms level service protection switchover for the backbone optical fiber are supported.
Supports in-service upgrade.
Supports high temperature detection to ensure the system safety.
The functions of querying the board temperature, setting the temperature threshold, and high temperature shutdown are supported.
Adopts 1+1 redundancy backup for the control board and the upstream interface board.
Supports hot swappable for all service boards and the control boards.
Provides soft-start circuit, protective circuit, current-limit protection, and short circuit protection for the input power of the boards in the subrack to protect the boards against lightning strikes and surges.
Supports GPON type B/type C OLT dual homing.
Supports smart link and monitor link for the network with dual upstream channels.

System performance

Backplane capacity: 3.2 Tbit/s; switching capacity: 960 Gbit/s; MAC address capacity: 512 K

Layer 2/Layer 3 line rate forwarding

BITS/E1/STM-1/Ethernet clock synchronization mode and IEEE 1588v2 clock synchronization mode

EPON access board

Adopts the design of 4-port or 8-port high-density board.

Supports the SFP pluggable optical module (PX20/PX20+ power module is preferred).

Supports a maximum split ratio of 1:64.

Provides the capability of processing 8 k streams.

Supports optical power detection.

Adopts the unique traffic processing technologyto meet the requirement of processing various VLANs.

GPON access board

Adopts the design of 8-port high-density GPON board.

Supports the SFP pluggable optical module (class B/class B+/class C+ power module is preferred).

Supports 4 k GEM ports and 1 k T-CONTs.

Supports a maximum split ratio of 1:128.

Supports the detection and isolation of the ONT that works in the continuous mode.

Supports the flexible DBA working mode, and the low-delay or high-bandwidth efficiency mode.

100M Ethernet P2P access board

Supports 48 FE ports and the SFP pluggable optical module on each board.

Supports the single-fiber bidirectional optical module.

Supports the DHCP option 82 relay agent and the PPPoE relay agent.

Supports Ethernet OAM.

Subrack dimensions (Width x Depth x Height)

MA5680T subrack: 490 mm x 275.8 mm x 447.2 mm

MA5683T subrack: 442 mm x 283.2 mm x 263.9 mm

Running environment

Operating ambient temperature: –25°C to +55°C

Power input

–48 VDC and dual power input ports (supported)

Operating voltage range: –38.4 V to –72 V

Huawei MA5683T is a aggregation Optical Line Terminal (OLT), it supports up to 6 service slots and can support maximum 12,000 subscribers (GPON). A typical MA5683T configuration includes one MA5683T Chassis, two Main Control Board SCUN/SCUK, two Power Board PRTE, one uplink board GICF (2 GE Optical with SFP Module), one 8 Port GPON board GPBD (with C+ SFP Module). This series features the industry’s first aggregation Optical Line Terminal (OLT), integrating ultra-high aggregation and switching capabilities, supporting 3.2T backplane capacity, 960G switching capacity, 512K MAC addresses, and a maximum of 44-channel 10 GE access or 768 GE ports.

  • 01 Original ProductHuawei Original OLT, Reliable Quality
  • 02 Discount PriceUnique Supply Channels, Affordable Price
  • 03 Free SoftwareFree to provide a full set of software, deploy quickly
  • 04 Technical SupportFree technical support, remote guidance
Tap Click image to expand
Convergence and access integration

Provides super large convergence switching capacity. Specifically, an MA5600T series device supports 1.5 Tbit/s backplane capacity, 960 Gbit/s switching capacity, and 512,000 MAC addresses.

Provides super high-density cascading capability. Specifically, an MA5683T device support a maximum of 24 x 10GE or 288 GE services, with no additional convergence switches.

High reliability

Provides highly reliable networking capabilities and ensures dual-OLT hot backup, remote disaster tolerance, and service upgrades without interruption.

Provides comprehensive Quality of Service (QoS) functions and supports traffic classification management, priority control, and bandwidth control. The Hierarchical-Quality of Service (H-QoS) function meets various Service Level Agreement (SLA) requirements of commercial customers.

Provides an End-to-End (E2E) highly reliable design, enabling Bidirectional Forwarding Detection (BFD), Smart Link, Link Aggregation Control Protocol (LACP) redundancy protection and GPON type B/type C line protection in the upstream direction.

Multi-scenario access

Supports access of multiple E1 private line services, and Native Time-Division Multiplexing (TDM) or Circuit Emulation Services over Packet (CESoP)/ Structure-Agnostic TDM over Packet (SAToP) function.

Supports the Emulated Local Area Network (ELAN) function and Virtual Local Area Network (VLAN)-based internal traffic exchange, satisfying enterprise and community network application requirements.

Supports non-convergence access of Internet Protocol television (IPTV) users. One subrack supports 8,000 multicast users and 4,000 multicast channels.

Smooth evolution

Supports GPON, 10G Passive Optical Network (PON), and 40G PON on a platform, enabling smooth evolution and achieving ultra-bandwidth access.

Supports IPv4/IPv6 dual stacks and IPv6 multicast, enabling smooth evolution from IPv4 to IPv6.

Energy saving

Uses special chips for conserving power. Specifically, 16 ports on a GPON board consume less than 73 W of power.

Supports idle board automatic power-off and intelligent fan speed adjustment, effectively lowering idle board power consumption.

System Performance

1.5T bit/s backplane capacity, 960G bit/s switch capacity, 512K MAC addresses

Line speed L2/L3 switching

Static route/RIP/OSPF/MPLS

TDM private line service with Native TDM or CESoP

BITS/E1/STM-1/Ethernet Synchronization/IEEE 1588v2/1PPS+ToD

GPON Line Card

8/16*port per card with pluggable SFP optical module(Class B+ or Class C+ are optional)

Up to 1:128 splitting ratio

Bidirectional FEC

ONU-based and queue-based traffic shaping

Rogue ONT detection and isolation

Type B / Type C protection and Type C dual-homing

Optical power meter (can support ±1dB precision)

eOTDR (1:8 splitting ratio)

10G GPON Line Card

4*port per card with pluggable XFP optical module

Up to 1:128 splitting ratio (N1)

Bidirectional FEC

Rogue ONT detection and isolation

Type B / Type C protection and Type C dual-homing

Coexist with GPON

Ethernet P2P Line Card

48 port per card with CSFP optical module, 768 ports per shelf

Port-based and queue-based traffic shaping

Single fiber double direction access, 100Mbit/s or 1000Mbit/s per port

DHCP Option 82 relay agent and PPPoE relay agent

Ethernet OAM

Ethernet synchronization

Shelf Dimensions

263 mm x 442 mm x 283.2 mm(H x W x D)

Operating Environment

–40°C to +65°C

5% RH to 95% RH

Power

–48V DC power input

Dual-power supply protection

Operating voltage range of –38.4V to –72V

Switching Capacity — Backplane Bus

1.5 Tbit/s

Access Capacity

24 x 10G GPON

96 x GPON

288 x GE

Port Type

Upstream ports: 10 GE optical and GE optical/electrical ports

Service ports: GPON optical port, P2P FE optical port, P2P GE optical port, and Ethernet optical port

System Performance

Layer 2/Layer 3 line-rate forwarding

Static route, RIP, OSPF, and MPLS

Clock synchronization schemes: BITS, E1, STM-1, Ethernet clock synchronization, 1588v2, and 1PPS + ToD

Maximum split ratio of 1:256

Maximum logical distance between devices: 60 km

The MA5608T Mini OLT is designed to address Fiber to the premise (FTTP) or deep fiber deployment scenarios where a large OLT chassis may not be the best fit for a variety of reasons. Huawei’s mini OLT MA5608T is designed to be the perfect complement to the other MA5600 series larger OLTs and offers the same carrier grade features and performance. MA5608T’s compact and front access design make it an ideal solution for deployments in locations such as space-constrained huts, outdoor cabinets or building basements. It has AC and DC powering options, extended temperature range, and offers easy installation. Designed to support ever-increasing bandwidth demand, MA5608T has 200 Gbps backplane. The combination of the high-capacity and line interf The MA5608T shares the same product architecture with the MA5600 series OLTs to allow seamless network growth. It features:
1. Shared services cards including GPON, XG-PON1 and VDSL2+POTS Combo. Any card, any slot in any combination.
2. Dual switching and control cards for redundancy and loadsharing with GE and 10GE uplinks.
3. Same software features and functions as other MA5600 series OLTs and interoperability with a large suite of ONTs, DSL CPEs, and Softswitches for voice service.

  • 01 Original ProductHuawei Original OLT, Reliable Quality
  • 02 Discount PriceUnique Supply Channels, Affordable Price
  • 03 Free SoftwareFree to provide a full set of software, deploy quickly
  • 04 Technical SupportFree technical support, remote guidance
Tap Click image to expand
Compact and modular design

2 RU, 19” rack mounting, 12” depth.

I/O Slots: 2 slots for service cards, 2 slots for switch and control cards, 1 slot for redundant power input.

Switch and control card with uplink ports: 60 Gbps switch card with integrated 2 port 10GbE and 2 port 1GbE WAN uplinks.

Service cards: 8 or 16 port GPON, 4 port XG-PON1, 48 port VDSL2+POTS Combo.

All service cards are interchangeable with other MA5600 Series OLTs.

Large capacity in Small Size

200 Gbps backplane

20 Gbps/slot capacity

120 Gbps load sharing switching capacity

2x10 Gbps uplink capacity.

Advanced Layer 2 Functions

QoS with traffic classification and L2 forwarding policy

Standard VLAN, QinQ VLAN, VLAN stacking

Flexible QinQ VLAN tagging

DHCP Option 82 in L2 mode

MEF-9 & MEF-14 certification

L3 Functions for maximum deployment flexibility

ARP, ARP proxy

DHCP relay, DHCP proxy

Static routing

Dynamic routing: RIP, OSPF, ECMP

Multicast: IGMP v2/v3, IGMP proxy, IGMP snooping

High Reliability

WAN uplink redundancy: BFD, MSTP, LACP, RSTP, RRPP Fiber redundancy with 50ms switchover

Carrier Class Availability: Dual switch and control card, dual power input, PON port redundancy

GPON

16 ports per card or 8 ports per card

Robust Compliance to G.984 Series standards with 2.5/1.2 Gbps downstream and 1.2Gbps line speed performance

Support for B+ or C+ optical modules (SFPs) with max 40km differential distance

Up to 1:128 split ratio per GPON port

Optical Power Monitoring, Real Time Rogue ONT detection/isolation

XG-PON1

4 ports per card

Fully compatible with GPON - compliance G.987 Series standards with 10/2.5 Gbps line speed performance

Supports XFP optical modules

VDSL2+POTS Combo

48 VDSL2 and POTS integrated ports with up to 17a profile

Two-pair bonding for maximum speed

G.INP (G.998.4) support for re-transmission at the physical layer

Built-in support for SELT, DELT, and MELT

POTS line Loop-Start Operation

Ringing Mode – Balanced ringing with -15VDC offset on "Ring"

Multiple CODECs – G.711 (µ-Law and A-Law), G.729, G.723, G.726

Powering Options

DC: -38.4VDC to -72VDC; AC: 100V to 240V

Dimensions

3.47in x 17.4in x 9.63in (Height x Width x Depth)

Operating Temperature

-40º F to +149º F

Storage Temperature

-40º F to +158º F

Cooling

Two multispeed fans, providing left to right forced air flow

Operating Humidity

5% to 85%, non-condensing, Altitude: 197 ft (60 m) below sea level to 13,123 ft (4,000 m) above sea level

Regulatory and Safety

UL listed, FCC, NEBS Level 3

How to use the OLT device to set up a PON network

How to build PON network, in the following figure, we provide a simple program, the customer can purchase the relevant products according to actual needs

Product interconnection applications
Why Choose Us

Competitive OLT equipment prices

Unique way for customers to reduce product costs.

Provide OEM customization services

Meet the special requirements of customers

Original product

ZTE, Huawei original OLT equipment, and provide a full range of software services.

Stable supply

Keep good relationship with domestic and foreign well-known operators, equipment manufacturers and network service providers.

Free technical support

We have experienced technical experts to improve customer use of products to guide the use of products to solve the problem.

Complete product support services

At Cozlink.com, we provide you a complete set of networking products.

Experience

8 years of optical communications products manufacturers and suppliers, has been committed to the optical fiber network communications product development and sales, customers in more than 200 countries and regions.

How to purchase ZTE Huawei OLT equipment from us here
By filling out our online form,let us know your needs
Work with our sales representative to determine your needs
Receive the PI we sent
Pay us
Give us feedback
Waiting for receipt
Confirm Order
Start your first step now
Name :
Email :
Body :